NEODUR HE 65

NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

  • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
  • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
  • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

Also available in colour, see KORODUR colour chart.

 

SKU 1220024S25KG Categories , ,

NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates – NEODUR HE 65 based on hardener KORODUR VS 0/5. All three qualities are processed as composite screed in one layer for heaviest stress demands acc. to DIN 18560, part 7. Also available in colours, see KORODUR colour chart.

Application
For the production of heavy duty industrial floors, e.g. in production halls, workshops, high-shelf-stores and other industrial areas exposed to heaviest stress.

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

  • KORODUR 0/4

    KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.

See More