KOROCURE

KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

SKU 1320576G30KG Categories , ,

KOROCURE is a liquid temporary evaporation retardant designed for the intermediate curing of freshly placed concrete.

The fresh concrete, depending its quality grade, the ambient temperature and the climatic conditions, may require protection measures acc. to DIN EN 13670 in connection with DIN 1045-3, such as the intermediate curing of the freshly placed concrete.

The intermediate curing restrains the water in the concrete from evaporation. Thus there is sufficient water in the concrete to allow the cement to hydrate properly.

Technical data
Colour and conditionyellowish liquid
Densityin Middle 1,0 kg/dm³
pH-valueapprox. 11

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • NEODUR HE 65 SVS 1,5

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR 0/4

    KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.

See More