KOROTAN

KOROTAN is used as auxiliary agent for the processing of KORODUR hard aggregate screeds in one layer, on fresh or set base concrete, as well as for all two-layer systems as additive for all types of screeds (see data sheet KORODUR-KOROTAN industrial floor).

SKU 1320565 Categories , ,

KOROTAN is a liquid special additive with plasticizing and stabilizing effect for KORODUR-KOROTAN industrial floors.

KOROTAN is used as processing aid:

  • for one-layer KORODUR hard aggregate screeds on fresh or set base concrete
  • for all two-layer systems
  • as additive for any type of screed

See also Industrial floor repair and data sheet KORODUR-KOROTAN industrial floor.

Technical data
Formgreen liquid
Density (20°C)1,13 g/cm³
pH-valueapprox. 9

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR PC

    KORODUR PC is a liquid, solvent-free, one-component, water dilutable, synthetic resin dispersion for pre-treatment of absorbent sub-bases for self-leveling NEODUR Level coatings.

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

  • KORODUR VS 0/5

    KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

See More