Showing 25–36 of 73 results

  • TRU Self-Leveling

    Use for polished, decorative screeds. For attractive, unique design of sales rooms, restaurants, foyers, museums, administrative buildings, schools, airports as well as any prestigious interiors. Qualified for indoor and outdoor use, also in wet areas. TRU Self-Leveling is a multipurpose product that allows individual and creative design in many colour variants and by broadcasting decorative aggregates (e. g. glass, marble). Given the manifold design options, it is recommended to run on-site pilot tests/test areas.

  • KORODUR nanoFinish

    KORODUR nanoFinish is applied during smoothing. Due to the film formation the smoothing process is improved, the drying out is slowed down and the addition of water becomes unnecessary. Nano-silica technology slows down water evaporation, retains moisture during surface treatment, and allows for complete hydration with maximum strength development. The probability of efflorescence, cracking due to early shrinkage (plastic shrinkage) and other surface irritations is reduced.

  • KORODUR easyFinish

    KORODUR easyFinish can be used for the production of concrete and screed surfaces, on fresh to matt damp surfaces as a smoothing aid.

  • KORODUR uniPrimer

    KORODUR uniPrimer for priming absorbent substrates. Suitable for subsequently applied coatings with bonding compound and KORODUR/NEODUR hard aggregate screeds as protection against too fast dehydration. KORODUR uniPrimer reduces the absorption behavior of dry sub-bases and thus the time-consuming prewetting in case of industrial floor renovations e.g. with NEODUR HE 65 or NEODUR HE 60 rapid. The sub-base is significantly improved. Evaporation of the KORODUR bonding compound HB 5 or HB 5 rapid is minimized by controlled suction behavior of the sub-base and a more uniform hydration of the bonded system is achieved.

  • KOROTAN

    KOROTAN is used as auxiliary agent for the processing of KORODUR hard aggregate screeds in one layer, on fresh or set base concrete, as well as for all two-layer systems as additive for all types of screeds (see data sheet KORODUR-KOROTAN industrial floor).

  • KORODUR TXPK

    KORODUR TXPK is used as primer on concrete and screed surfaces where a later moisture exposure of the back has to be expected.

  • KOROMINERAL Li+

    KOROMINERAL Li+ is used for the impregnation of mineral, cementitious sub-bases, such as polished and not polished concrete floors/screeds, prefab concrete/terrazzo. KOROMINERAL Li+ penetrates deeply into the surface and reacts with the free lime to calcium silicate hydrate, which gradually hydrates into a glass-like crystalline structure. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and obtain increasingly more shine. The surface remains open to diffusion.

  • KORODUR DUROP

    The excellent wear-resistance, anti-slip property and polishing resistance of DUROP offer manifold possibilities of application in industrial flooring as well as in road construction. Major fields of use are dairies, breweries, slaughter houses, wet production facilities, chemical factories, battery rooms, ramps and car parks. DUROP is as well suitable for driving lanes, bicycle trails, anti-skid bridge coatings and passages, e.g. at airports. DUROP effects a significant grip improvement and thus provides a major contribution to accident reduction. The noticeably reduced rolling noises in addition are considered as active noise protection and environmental contribution. DUROP is also suitable as dry-shake material for bituminous driving lanes to improve the anti-skid properties of mastic asphalt (standard construction system) acc. to RSTO 2001.

  • NEODUR Level AU

    The use of NEODUR Level AU increases the energy and resource efficiency and conserves natural resources. A hard aggregate industrial floor has an outstanding durability. The service life of a hard aggregate industrial floor is many times longer than that of a pure concrete floor or alternative industrial flooring systems. For further information contact KORODUR.

  • NEODUR Level

    For the production of direct wearing layers, bonded on mineral concrete sub-bases or cement screeds, as industrial floor for new construction and repair, e.g. in service and store rooms, production halls, underground car parks, sales rooms etc.

  • KORODUR FSCem Screed

    For the production of cement screeds that can be quickly covered, e.g. as underlayment screed up to layer thickness of maximum 120 mm, indoors and outdoors:
    • on separation layer
    • as bonded screed
    • on insulation layer
    • as heated screed
    As sub-base for the installation of KORODUR/NEODUR hard aggregate screeds, KORODUR decorative screeds, coatings, ceramic tiles, natural stone tiles, cast concrete tiles, parquet and laminate as well as elastic and textile coverings. KORODUR FSCem Screed is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts. KORODUR FSCem Screed must always receive a covering layer.

  • KORODUR FSCem

    For the production of cement screeds which are quickly ready for covering, indoors and outdoors:
    • as bonded screed
    • on separation layer
    • on insulation layer
    • as heated screed
    As sub-base for the installation of KORODUR/NEODUR screeds, KORODUR decorative screeds, coatings, tiles, natural stone tiles, cast concrete tiles, parquet, laminate, elastic and textile coverings. With KORODUR FSCem also wear-resistant screeds can be produced e.g. by adding the hard aggregate KORODUR VS 0/5. KORODUR FSCem is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts.