NEODUR HE 40 and HE 40/8

NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

  • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
  • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
  • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

SKU 1220040S25KG Categories , ,

NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualitites NEODUR HE 40, layer thickness as bonded screed up to 35 mm and NEODUR HE 40/8 as bonded screed up to 50 mm. Processing in one layer as bonded screed for heavy-duty stress.

Application
For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, aircraft hangars. Workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • NEODUR HE 65 SVS 1,5 extra

    NEODUR HE 65 SVS 1,5 extra is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • GRANIDUR BIANCO/NERO

    Use for polished, decorative screeds in a middle layer thickness of 15 mm in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More