KORODUR COPETTI FLOOR KCF

KCF 05 and KCF 08 are installed in one or two layers acc. to

  • DIN 18560-2 screeds and heated screeds on insulation layer
  • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
  • DIN 18560-4 screeds on separation layer

KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

SKU KCF 05: 1220217S25KG; KCF 08: 1220215S25KG Categories ,

KCF 05 and KCF 08 – factory produced, ready to use, coloured dry mortars for the production of smoothed, decorative screeds in a layer thickness of 15 to max.70 mm, depending on the construction.

Colours: cement-grey, light-grey, basalt-grey, anthracite, beige, red, olive

KCF 05 and KCF 08 – applied in one or two layers acc. to

  • DIN 18560-2 screeds and heating screeds on insulation layer
  • DIN 18560-3 composite screeds with KORODUR Bonding Compound HB 5
  • DIN 18560-4 screeds on separation layer

Fields of application
Sales rooms, museums, exposition rooms, boutiques, lobbies, office and administration buildings, restaurants, galleries.

Technical data KCF 05
Grain size0 – 5 mm
Compressive strength45 N/mm²
Tensile strength6 N/mm²
Wear resistance≤ 5 cm³/50 cm²
Layer thickness15 – 25 mm
Technical data KCF 08
Grain size0 – 8 mm
Compressive strength35 N/mm²
Tensile strength5 N/mm²
Wear resistance≤ 5 cm³/50 cm²
Layer thickness25 – 50 mm

Basically the current technical data sheet refers.

Additional system components

  • Primer
  • Surface treatment KOROCLEAN
  • Maintenance systems
    • OBTEGO Porenfüller P 20
    • OBTEGO Fleckschutz R 400

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • NEODUR HE 65 metallic

    NEODUR HE 65 metallic is a ready to use cementitious hard aggregate screed with metallic aggregates on the basis of KORODUR hard aggregates acc. to DIN 110 (group M) on the basis of KORODUR WH-metallic.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

See More