KORODUR HB 5 rapid
KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.
Downloads
Additional Information
Related products
-
KOROCURE
KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.
-
NEODUR HE 40 and HE 40/8
NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities
- NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
- NEODUR HE 40: layer thickness as bonded screed up to 35 mm
- NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm
Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.
-
NEODUR HE 65 plus SVS 3
NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities
- NEODUR HE 65 Plus: on the basis of KORODUR VS 0/5
- NEODUR HE 65 Plus SVS 3: on the basis of KORODUR WH-Special
Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.
-
GRANIDUR
Use for polished, decorative screeds in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.