NEODUR HE 3 metallic

NEODUR HE 3 metallic

For the production of industrial floors to improve the surface hardness and to increase the wear resistance of the floors being subjected to direct industrial stress. Specially qualified for areas with metallic stress, e.g. by iron wheel traffic, rolling, plant traffic with steel or polyamide tires. Indoors and outdoors.

SKU 1220109S40KG Categories , ,

NEODUR HE 3 metallic is a ready to use cementitious dry mortar for the production of industrial floors in dry-shake method acc. to DIN EN 13813 on the basis of KORODUR hard aggregates acc. to DIN 1100 coating group M (KORODUR WH-metallic).

Application
For industrial floors to improve the surface hardness and the wear resistance of the floors being subjected to direct industrial stress. Indoors and outdoors.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5

    KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • NEODUR HE 65 plus SVS 3

    NEODUR HE 65 plus SVS 3

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • KORODUR COPETTI FLOOR KCF

    KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

  • KORODUR WH-metallic

    KORODUR WH-metallic

    KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.

See More