KORODUR 0/4

KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.

SKU 1120002S25KG Categories , ,

KORODUR 0/4 – hard aggregate acc. to DIN 1100 – A 0/4 – mineral hard aggregate producted from high grade components including quartz sand and tough by-products of electrometallurgical melting process. This special mixture guarantees outstanding tensile and compressive strength values, very favourable wearing properties and imparts stable anti-skid properties to industrial flooring surfaces.

Application
For use in hard aggregate concrete screeds acc. to DIN 18560, ZE 65 A. For use in areas of combined rolling, ramming and grinding stress, percussion, pressure and impact. Able to withstand the sliding and rolling of work parts, plant traffic of all kinds, fork-lift traffic, crawler tractor traffic and transporting equipment with steel wheels etc. Especially qualified for wet rooms, parking areas, driving and loading ramps, bunker linings and outdoor surfaces of all kinds.

Technical data
Grain size0 – 4 mm
Compressive strength70 N/mm²
Tensile strength10 N/mm²
Wear resistance≤ 5 cm³/50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROMINERAL CURE

    KOROMINERAL CURE is a liquid, one-component, membrane-forming curing compound to prevent premature drying out in combination with silicatization.

    KOROMINERAL CURE provides long-lasting protection against moisture, dirt and wear. The silicate penetrates deeply in the pores of the concrete, reacts with the free calcium and forms a durable bond with the concrete, both indoors and outdoors. After the application, the surface is dust-proof and water-repellent. KOROMINERAL CURE dries transparently.

  • NEODUR HE 3

    For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

  • NEODUR HE 65 metallic

    NEODUR HE 65 metallic is a ready to use cementitious hard aggregate screed with metallic aggregates on the basis of KORODUR hard aggregates acc. to DIN 110 (group M) on the basis of KORODUR WH-metallic.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

  • GRANIDUR BIANCO/NERO

    Use for polished, decorative screeds in a middle layer thickness of 15 mm in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

See More