NEODUR HE 2

NEODUR HE 2

For industrial floors to improve surface hardness and wear resistance of floors subjected to direct industrial stress. Suitable for indoor and outdoor use. 

SKU 1220118S25KG Categories , ,

NEODUR HE 2 acc. to DIN 18557 (factory mortars) and DIN EN 13813, ready to use, cementitious dry mortars for the production of industrial floors in dry-shake method. Available colours, see our KORODUR colour chart.

Application
For industrial floors to improve the surface hardness and the wear resistance of the floors being subjected to direct industrial stress. Indoors and outdoors.

Technical data
Grain size0 – 3 mm
Compressive strength70 N/mm²
Tensile strength9 N/mm²
Wear resistance≤ 8 cm³/ 50 cm²

Additional system components

Downloads

Additional Information

Related products

  • KOROCURE

    KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • KOROTEX

    KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • NEODUR HE 65 plus SVS 3

    NEODUR HE 65 plus SVS 3

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • KORODUR WH-metallic

    KORODUR WH-metallic

    KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.

See More