KORODUR VS 0/5

KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

SKU 1120005S25KG Categories , ,

KORODUR VS 0/5 – hard aggregate, acc. to DIN 1100-A 0/5. KORODUR VS 0/5 – hard aggregate produced from high grade components including quartz sand and tough byproducts from electro-metallurcigal melting process. KORODUR VS 0/5 guarantees outstanding tensile and compressive strength values, very favourable wearing properties and imparts stable anti-skid properties to industrial flooring surfaces. For the use in hard aggregates screeds acc. to DIN 18560-7, “cementitious hard aggregate screed in one layer as composite screed on base concrete.”

Application
Specially qualified for sole concrete techniques, concrete with plasticizer, concrete with or without reinforcement, steel fibre reinforced concrete, vacuum concrete. For all hard aggregate industrial flooring areas with power trowelling. The use of KORODUR VS 0/5 allows power trowelling without unfavourable concentration of fine particles at the surface. Optimum surface sealing. No shrinkage or contraction cracks where the material is correctly installed. For use in areas of combined rolling, ramming and grinding stress, percussion, pressure and transporting equipment with steel wheels etc.

Technical data
Grain size0 – 5 mm
Compressive strength70 N/mm²
Tensile strength10 N/mm²
Wear resistance≤ 5 cm³/50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • NEODUR HE 3

    For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

See More