KORODUR FSCem

For the production of cement screeds which are quickly ready for covering, indoors and outdoors:
• as bonded screed
• on separation layer
• on insulation layer
• as heated screed
As sub-base for the installation of KORODUR/NEODUR screeds, KORODUR decorative screeds, coatings, tiles, natural stone tiles, cast concrete tiles, parquet, laminate, elastic and textile coverings. With KORODUR FSCem also wear-resistant screeds can be produced e.g. by adding the hard aggregate KORODUR VS 0/5. KORODUR FSCem is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts.

SKU 1220527S25KG Categories , ,

KORODUR FSCem is a cementitious, low-shrinkage rapid-setting screed binder on ternary basis for the production of heavy-duty screeds which are quickly usable and early ready for covering, acc. to DIN 18560 and EN 13813 (strength classes CT-C50-F7 to CT-C40-F6).

Application
KORODUR FSCem is used for the installation of cement screeds which are quickly ready for covering, indoors and outdoors

  • on separation layer
  • in compound
  • on insulation layer
  • as heating screed

as sub-base for the installation of

  • KORODUR/NEODUR screeds
  • KORODUR decorative screeds
  • coatings
  • tiles
  • natural stone tiles
  • concrete stone tiles
  • parquet and laminate
  • elastic and textile coverings
Technical data
Mixing ratio
as an example 1:4
in weight units*
Quality CT-C50-F7		KORODUR FSCem
screed sand A8 – B8
water/cement ratio		75 kg
300 kg
approx. 0,42
Mixing ratio
as an example 1:5
in weight units*
Quality CT-C40-F6		KORODUR FSCem
screed sand A8 – B8
water/cement ratio		60 kg
300 kg
approx. 0,40
Residual moistureCM-measurement after installation
mixing ratio 1:4 and 1:5,
see above		after 24 hours approx. 5,9 %
after 3 days approx. 1,9 %
after 28 days approx. 1,3 %

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

  • KORODUR VS 0/5

    KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

See More