KOROCLEAN

KOROCLEAN

Industrial floors are extremely heavily stressed components that require special consideration both during production and cleaning, because they are subject to extraordinary wear and tear. The requirements for an industrial floor include high compressive strength, abrasion resistance, impact strength, structural density, work safety as well as appearance and cleanability. KORODUR and NEODUR hard aggregate industrial screeds meet all these requirements and offer maximum long-term benefits.

Categories ,

Downloads

Additional Information

Related products

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • NEODUR HE 65

    NEODUR HE 65

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

     

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • KORODUR WH-metallic

    KORODUR WH-metallic

    KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.

See More