NEODUR Level
NEODUR Level - Image 2
NEODUR Level - Image 3
NEODUR Level - Image 4
NEODUR Level - Image 5

NEODUR Level

For the production of direct wearing layers, bonded on mineral concrete sub-bases or cement screeds, as industrial floor for new construction and repair, e.g. in service and store rooms, production halls, underground car parks, sales rooms etc.

SKU 1220285S25KG Categories , , ,

NEODUR Level – cementitious, mineral, fast-setting, polymer-modified, thin-layer industrial floor for layer thickness of 4 to 30 mm, CT-C40-F8-AR0,5.

Application

  • for sales rooms
  • for new construction and restoration of storage areas and production halls
  • in composite on mineral sub-base
  • for underground carparks
Technical data
Layer thickness4 – 30 mm
Walkabilityafter approx. 3 hours
Compressive strength≥ 35 N/mm²
Tensile strength≥ 8 N/mm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROMINERAL

    KOROMINERAL

    KOROMINERAL is a liquid, transparent impregnation on silicate basis for the improvement of mineral surfaces. Due to the increasing silicification, the cement matrix improves in the course of time. A significant improvement of the wear resistance is not possible.

  • NEODUR HE 65 SVS 3

    NEODUR HE 65 SVS 3

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualitites

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR COPETTI FLOOR KCF

    KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

  • KORODUR WH-metallic

    KORODUR WH-metallic

    KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.

See More