KORODUR TXPK

KORODUR TXPK is used as primer on concrete and screed surfaces where a later moisture exposure of the back has to be expected.

SKU 1320608 Categories , ,

KORODUR TXPK is a 2-component epoxy resin special primer for self-leveling coatings such as TRU Self-Leveling, LevelFlor, NEODUR Level products etc. KORODUR TXPK is used as primer on concrete and screed surfaces, where a later moisture exposure on the back has to be considered.

KORODUR TXPK meets the guidelines of AgBB with respect to the lowest possible degree of emissions related to indoor air pollution, for the use in commercial areas as primer on concrete and screed sub-bases for self-leveling coatings.

Technical data
Colourwhite (off-white)
Densityapprox. 1,10 g/cm³
Viscosityapprox. 750 mPa s ± 100
Compressive strengthapprox. 60 N/mm²
Flexural strengthapprox. 30 N/mm²
Modulus of elasticityapprox. 2.000 N/mm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR PC

    KORODUR PC is a liquid, solvent-free, one-component, water dilutable, synthetic resin dispersion for pre-treatment of absorbent sub-bases for self-leveling NEODUR Level coatings.

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • NEODUR HE 65 plus

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • GRANIDUR

    Use for polished, decorative screeds in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

See More