KOROCRETE is a fast-setting concrete based on KORODUR FSCem, a cementitious, dimensionally stable, fast-setting screed binder on ternary basis for the production of heavy-duty concrete floors, which are quickly usable and early ready for covering (strength classes C35/45 to C50/60 based on DIN EN 206). Due to the high early strength, the flooring areas can be used and released to traffic within a few hours after their placement. For example, this can minimize the sometimes very high costs related to down times of production and storage facilities.
KOROCRETE
For production of quickly usable concrete floors, indoors and outdoors. Repair of concrete floors with high durability due to dimensional stability and high final concrete strengths.
Related products
-
KOROMINERAL CURE
KOROMINERAL CURE is a liquid, one-component, membrane-forming curing compound to prevent premature drying out in combination with silicatization.
KOROMINERAL CURE provides long-lasting protection against moisture, dirt and wear. The silicate penetrates deeply in the pores of the concrete, reacts with the free calcium and forms a durable bond with the concrete, both indoors and outdoors. After the application, the surface is dust-proof and water-repellent. KOROMINERAL CURE dries transparently.
-
NEODUR HE 40 and HE 40/8
NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities
- NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
- NEODUR HE 40: layer thickness as bonded screed up to 35 mm
- NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm
Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.
-
NEODUR HE 65 SVS 1,5
NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities
- NEODUR HE 65: on the basis of KORODUR VS 0/5
- NEODUR HE 65 SVS 3: on the basis of KORODUR WH-Special
- NEODUR HE 65 SVS 1,5: on the basis of KORODUR Diamond Concrete
Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.
Also available in colour, see KORODUR colour chart.
-
KORODUR WH-metallic
KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.
KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.
