KORODUR uniPrimer

KORODUR uniPrimer

KORODUR uniPrimer for priming absorbent substrates. Suitable for subsequently applied coatings with bonding compound and KORODUR/NEODUR hard aggregate screeds as protection against too fast dehydration. KORODUR uniPrimer reduces the absorption behavior of dry sub-bases and thus the time-consuming prewetting in case of industrial floor renovations e.g. with NEODUR HE 65 or NEODUR HE 60 rapid. The sub-base is significantly improved. Evaporation of the KORODUR bonding compound HB 5 or HB 5 rapid is minimized by controlled suction behavior of the sub-base and a more uniform hydration of the bonded system is achieved.

SKU 1320606G30KG Categories ,

KORODUR uniPrimer – liquid, solvent-free, one-component, ready to use – the universal primer based on acrylate, co-polymer and silicate for the pre-treatment of differently absorbent concrete sub-bases for coating with cementitious hard aggregate screeds. KORODUR uniPrimer for priming absorbent substrates. Suitable for subsequently applied coatings with bonding compound and KORODUR/NEODUR hard aggregate screeds as protection against too fast dehydration. KORODUR uniPrimer reduces the absorption behavior of dry sub-bases and thus the time-consuming pre-wetting in case of industrial floor renovations.

Technical data
Formliquid
Colourmilky-white
Density1,05 g/m³
pH-value11,6

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • NEODUR HE 3 SVS 3

    NEODUR HE 3 SVS 3

    For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • KORODUR COPETTI FLOOR KCF

    KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

  • KORODUR WH-Special

    KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More